RATED CAPACITY:

Upto 100/115mm to a depth of 30 mtrs. (100 ft.)

ANGLE HOLE DRILLING (OPTIONAL):

Drill can be fitted for angle drilling to drill 0-25 Degrees in step of 5 Degrees.

PULL DOWN PRESSURE:

Variable to 7,500 Kgs (16560 lbs) through hydraulic cylinder.

AIR COMPRESSOR:

10.3 m3/min at 7 kg/cm2 (365 CFM / 100 PSI) rotary vane type compressor.

ROTATION HEAD:

Hydraulic top drive head, variable speed 0 to 100 RPM Torque 300 kg.mt. (2172ft. lbs)

POWER UNIT:

Single Diesel Engine driven developing around 170 H.P. for driving compressor and hydraulic system through power take off arrangement.

MOUNTING:

Individual crawler track control gives full maneuverability on narrow benches. Pads are 16" wide triple grouser.

LEVELLING JACKS:

4 Nos. Hydraulic leveling jacks individually controlled.

MAST:

6.7 M. High (22 ft.).Electrically welder tubular construction suitable for 4.5M (15 Ft.) long drill rod.

DRILL RODS:

73mm / 76mm x 4.5 mtrs (15 Ft.) long drill rod with 23/8" API REG. Box and pin connection (OTHER SIZES AVAILABLE ON REQUEST)

ROD CHANGER:

Pivoted rod changer can carry 5 Nos. of 4.5 mtrs. (15 Ft.) long drill rods in a rotary fixture.

BREAK OUT WRENCH:

Break out wrench positioned hydraulically from the cab.

HYDRAULIC SYSTEM:

Three individual circuits. Total oil displacement 58 GPM (219 LPM) maximum pressure 140 kg/cm2 (2000 PSI)

DUST COLLECTOR:

The drill is equipped with low maintenance, compact dry type dust collector (LMP DC-300 Series).

CONTROL:

Control console provides fingertip control of all functions.

OPTIONALS :